3103 Hydrophilic injection stop leak agent

Inject-Grout 3103 is a solvent-free, single-agent polyurethane agent that becomes hydrophilic when in contact with water. It rapidly expands after the interaction of the two, achieving the purpose of water blocking. Its greatest feature is that in addition to its high strength, it can also maintain a high degree of elasticity, making it a stretchable waterproof material.

1. When in contact with water, it will immediately undergo a chemical reaction and expand or form a colloid

2. Low expansion rate.

3. Can react with one to four times the amount of water.

4. Highly flexible.

5. Good chemical resistance.

6. It can also be used in areas that come into contact with drinking water, and is environmentally friendly.

1. Seal the damp cracks on concrete components.

2. Improve soil and prevent water leakage.

3. Seal wet joints.

4. Fracture injection with hydraulic groundwater flow.

5. Underwater structures with large expansion and contraction ratio.

6. Water-stopping injection for structures with large water surges due to cracks.

1. Check cracks and leaks and determine the injection location.
2. Drill a hole to install the irrigation needle.
3. Inject Inject-Grout 3103 Stop-Leak Agent into the crack.
4. Continue to pour until the stop-leak agent bubbles out of the crack.
5. After the leak is stopped, remove the needles and the leaked foam and trim the wall surface. The construction is completed.

Inject-Grout 3103 is available in 20 kg anti-collision steel drums