3102 Foaming anti-leakage agent

Inject-Grout 3102 is a solvent-free, single-agent polyurethane agent that becomes water-repellent and expands rapidly when in contact with water. Its greatest feature is that it can react with any water, making it widely applicable.

1. Can be mixed with any water (such as sea water).
2. It will immediately undergo a chemical reaction and expand when in contact with water.
3. High expansion rate.
4. Strong adhesion to substrate.
5. Good resilience.
6. Good chemical resistance.
7. It can also be used in areas that come into contact with drinking water, and is environmentally friendly.

1. Seal the damp cracks on concrete components.
2. Stop water leakage.
3. Seal wet joints.
4. Fracture injection with hydraulic groundwater flow.
5. The best waterproof material for inverted construction.
6. When small construction sites need to stop water quickly.

1. Check cracks and leaks and determine the injection location.
2. Drill a hole to install the irrigation needle.
3. Inject Inject-Grout 3102 Stop-Leak Agent into the crack.
4. Continue to pour until the stop-leak agent bubbles out of the crack.
5. After the leak is stopped, remove the needles and the leaked foam and trim the wall surface. The construction is completed.

Inject-Grout 3102 is available in 4kg and 20kg impact-resistant steel drums